Array electronic AF-10MR-A, Руководство пользователя

Страница: 77 / 122

C
hapter
V
T
he
V
oice
M
odule
5.2 Connection between Voice Module and FAB
Firstly connect the power to the Voice Module and FAB, and then plug the tele-
phone connector into the TEL socket. Connect the Voice Module and FAB by
using the special connection (Note: using the special part of FAB series) in fig -
ure 5.2. For convenient installation, there is a DIN rail clamp on the bottom of
the Voice Module. It can be easily installed on a common DIN rail.
Fig 5.2
Note: Before recording or playing the voice messages, Voice Module and
FAB need to be connected with a special connection. At the same time, the
FAB can communicate with a PC through the communication cable to modify
a program,as shown in the above picture. After connecting FAB with Voice
Module, then power them simultaneously or Voice Module first and then FAB.
5.3 Instructions
1.The first four sections (section 0, section 1, section 2 and section 3) are for the
voice system, which users can not record randomly:
Section 0: the prompt voice message for playing when external telephone is dialed
into Voice Module.
Section 1: the prompt voice message for playing after inputting the correct pass-
word.
Section 2: the prompt voice message for playing, after entering the wrong pass-
word.
67