Aros NETMAN204 SOLAR, Инструкция по установке и эксплуатации

Страница: 18 / 38

-
18
-
0MNPVESA52LUA
Example: let’s suppose we have a PV set of panels for a total of 8KWp to an inverter that has a
nominal power of 10KW; than the parameter will be
𝑘 =
8
10
∗ 100 = 80%
Administrator parameters
From this screen the user can change network and network-related parameters, the language of the
virtual screen, the settings of the external measure and the source of the commands for driving the
behavior of the inverter from an external source.
Hitting the first upper button the user can change the network parameters, as seen here:
The user can choose DCHP or a static IP configuration. Please note that invalid addresses will be
shown with a special symbol close to the parameter involved. Please also note that the only way to
change IP/Netmask/Gateway parameters is to tap the corresponding cell with the mouse cursor and
click the numeric keypad numbers (and dot).
In the following examples, you’ll see a wrong configuration (the Apply button does not appear) and a
correct configuration (the Apply button is available to reconfigure network):

KO

OK!