Before First Use
1.
Read all the instructions and important safeguards.
2. Remove all packaging materials; check that all items are received in good
condition.
3. Wash the ‘Stainless Steel Inner Pot’ with warm, soapy water using a sponge or
dishcloth.
4. Rinse thoroughly to remove any soapy residue.
5. Wipe body and ‘Stainless Steel Inner Lid’ clean with a damp cloth.
Ø
Do not use abrasive cleaners or scouring pads.
Ø
Do not immerse the appliance, cord or plug in water at any time.
To Heat Water
1. Lift the ‘Lid Handle’ to open the lid. If needed, for filling purposes, the entire
lid can be removed from the ‘Load/Unload Hinge’ on the back of lid.
2. Fill the ‘Stainless Steel Inner Pot’ with water anywhere between the “Full” mark
in the ‘Stainless Steel Inner Pot’ and the “Refill” mark on the ‘Water Level
Indicator Window’, depending on desired quantity. Properly replace the lid
before heating water.
3. Attach the power cord by plugging the connector to the main body and
then connect the plug to wall outlet.
4. The ‘Heat Indicator Light’ will illuminate and the water will automatically begin
heating.
5. Once the water has come to a boil, the unit will automatically switch to the
“Warm” function. The ‘Heat Indicator Light’ will go off and the ‘Warm
Indicator Light’ will illuminate. It will remain in the “Warm” function as long as it
is plugged in.
4
HOW TO USE
Warning
•
Never fill water past the “FULL” mark in the ‘Stainless Steel
Inner Pot’ or below the “REFILL” mark on the ‘Water Level
Indicator’, otherwise it may spill over or cause damage to the
unit.
•
Do not open the lid while water is boiling to avoid scalding
by hot steam.
•
Never operate the Hot Water Central if the amount of water is
below the “REFILL” line.
NOTE
If filled to the full, 3-liter capacity, water will take approximately 30
minutes to reach a boil. Smaller amounts of water will have a
proportionally shorter boiling time.
3
1. Lid Handle
2. Manual Dispensing Pump
3. Load/Unload Hinge
4. Pressure Pump Safety Lock
5. Handle
6. Water Level Indicator
7. Cup Switch
8. Dispensing Spout
3
PARTS IDENTIFICATION
9. Stainless Steel Inner Pot
10. Stainless Steel Inner Lid
11. Unlock Button
12. Automatic Dispenser
13. Re-boil Button
14. Warm Indicator Light
15. Heating Indicator Light
4
5
12
6
8
7
13
14
15
11
1
2
10
9
All manuals and user guides at all-guides.com
all-guides.com
