6
HOW TO USE
To Reboil
Water may be reboiled at any time. If you wish to bring the water to a boil
again, press the ‘Reboil Button’. In order to use the “Reboil” function, the unit
must be in the “Warming” function (the ‘Warm Indicator Light’ will be lit).
NOTE
•
Reboil time will vary based on the amount of water being
reboiled.
•
Never operate the Hot Water Central if the amount of water is
below the “REFILL” line.
Using the Unlock Feature
For safety reasons, this unit will automatically lock after each use. All buttons will
be locked and water will not dispense.
To use the unit, press the ‘Unlock Button’. The ‘Warm Indicator Light’ will
illuminate and all buttons will function properly.
To Dispense Water
Automatically:
To automatically dispense water, first the locking feature must be disabled as
instructed above. Then press the ‘Automatic Dispenser’ button and water will
begin to pour. Water will continue to dispense as long as the button is pressed.
To stop dispensing, release the button.
Manually:
To dispense water with the manual pump, move the ‘Safety Lock’ on the top
of the lid to the “On” position and press down on the ‘Manual Dispensing
Pump’. Pressing down will dispense water. Repeat until desired amount of
water has been dispensed.
Cup Switch Dispensing:
To dispense using the ‘Cup Switch’, first the locking
feature must be disabled as instructed above.
Then press a cup against the ‘Cup Switch’ located
behind the ‘Dispensing Spout’ (
see Diagram A
).
Water will begin pouring once the switch is
depressed. To stop dispensing, simply remove the
cup.
5
HOW TO USE
Diagram A
TIP
The manual dispense option is excellent for serving, since no
power is needed. Disconnect the cord and bring the hot pot to
a hard surface for making and sharing favorite hot beverages
with guests and family.
All manuals and user guides at all-guides.com
