ARMTEL TOP-HS-IP2, Руководство пользователя

Страница: 12 / 36

TOP-HS-IP2 HANDSET UNIT
User Manual
page 10/32 armtel.com
© Armtel info@armtel.com
1.1.5.2 The base stand and handset of TOP-HS-IP2 are produced in a plastic
enclosure. The permanent magnet fixed inside the handset, when picking up the handset
causes opening of the reed relay located at the base of the printed board, whereby the
handset is activated. Picking up the handset with incoming call automatically turns on the
voice communication mode; replacing the handset causes to call disconnection
1.1.5.3 The printed board is housed inside the base with three-position DIP-switch
whereby the address of the Handset unit is set up via I
2
C interface in communication
mode. The address should be set up before TOP-HS-IP2 employment with regard
to Table 3 . In this iteration, AD0 module address is set up by default.
Table 3 – Setting the address when connecting via I 2 C interface
Address number
TOP-HS-IP2
Positions of DIP-switches
1 2 3
AD0 OFF OFF OFF
AD1 OFF ON OFF
AD2 OFF OFF ON
1.1.5.4 TOP-HS-IP2 handset can be connected to any RJ-22 socket of the base via
the handset stretch cord provided.
Above the base stand through the slots in the housing are output connection cables
to the TOP-DIS-IR2 or TOP-PAD-IP2:
− the analog path of the TOP-HS-IP2 is connected to one of the RJ-22 4P4C
connectors;
− digital path I
2
C interface – to the socket RJ-25 6P6C (call station).