ARMTEL TOP-HS-IP2, Руководство пользователя

Страница: 17 / 36

TOP-HS-IP2 HANDSET UNIT
User Manual
armtel.com page 15/32
info@armtel.com © Armtel
2 INTENDED USE
The product is designed for continuous 24-hour a day operations. After
commissioning, the product does not require operator intervention, unless:
−
maintenance;
−
product configuration changes.
Maintenance personnel must be strictly guided by this document in compliance with
safety regulations.
The product along with the operational documentation is delivered to the customer
in packaged form.
2.1 Operating limits
2.1.1 The product shall be used under exposure factors and ambient parameters
which do not exceed permissible values given in 1.1.3 .
2.1.2 The requirements for operating conditions and the choice of the place
of installation given in this document take into account the most typical
factors that affect the operation of TOP-HS-IP2.
Factors that cannot be predicted, estimated or verified, and which the manufacturer
was unable to factor in during development may exist or arise during operation at the
operating facility.
In the event of such factors, find another operating site where said factors do not
exist or do not affect operation of the product.
2.2 Preparation for use
Preparation of TOP-HS-IP2 for use shall be carried out by the manufacturer’s
representatives, or personnel trained to operate Armtel LLC products.
The main preparation of the product for use is carried out during installation and
connection:
− checking TOP-HS-IP2 package contents;
− visual inspection of the product for damage (cracks, dents, chips, etc.);
− install and connect TOP-HS-IP2 at the operating site (refer 2.4 ).