ARMTEL TOP-HS-IP2, Руководство пользователя

Страница: 19 / 36

TOP-HS-IP2 HANDSET UNIT
User Manual
armtel.com page 17/32
info@armtel.com © Armtel
2.4 Installation, connection and dismantling
2.4.1 Basically, TOP-HS-IP2 should have a desktop-mounting. If TOP-HS-IP2 is
desktop-mounted, it is attached to TOP-DIS-IP2 and TOP-PAD-IP2 using aluminum
junction plates provided, which should be ordered complete with TOP-HS-IP2 in the
requested order. The dimensions of the plates, fixing mode and desktop mounting
configurations are given in Appendix B .
2.4.2 For wall-mounting and turntable-mounting of TOP-DIS-IP2 or TOP-PAD-IP2,
the TOP-HS-IP2 should be attached similarly to desktop mounting using junction plates
provided if desktop mounting.
2.4.3 The layout and recommendations for flush-mounting of TOP-HS-IP2 are given
in Appendix B .
2.4.4 Connect the handset to the base stand using the handset stretch cord provided,
connect both analogue and digital communication paths to the sockets located at the base
stand (see Figure B.2, Appendix B ). The AUI cables for TOP-HS-IP2 are laid in the channels
of the base stand and enclosures of the desktop or panel-mounted call stations in
accordance with the directions given in the User manuals for TOP-DIS-IP2 and
TOP-PAD-IP2.
The address of TOP-HS-IP2 is not set up in I
2
C interface path for the given iteration.
2.4.5 TOP-HS-IP2 is dismantled in the following order:
− disconnect all connection cables;
− disconnect junction plates;
− in case turntable- mounting − remove the structure from the turntable and
detach junction plates to TOP-DIS-IP2 or TOP-PAD-IP2;
− in case wall-mounting – remote the structure from the
bracket
detach junction
plates to TOP-DIS-IP2 or TOP-PAD-IP2;
− in case flush-mounting – detach TOP-HS-IP2 from a desktop;
−
pack in consumer package (cardboard box).