11
Aim the Programmer at the Control Panel and tap “
Trigger
”.
This must be done within 30 seconds of Arming or the valve must be Armed again.
Thermal Disinfection (Triggering)
Triggering the disinfection.
Disinfection is triggered when box turns red.
Waterflow starts when countdown reaches 0.
Note!
The Control Panel is enabled during disinfection, if any sensor is activated then
the disinfection cycle is aborted.
WARNING!
For continued protection against legionella, thermal disinfection must be
carried out on a regular basis. Please consult your national guidelines for details.
(09,
(09,
Valve Disinfection
Arm
Trigger
Read Log
Clear Log
Triggering
Valve Disinfection
Arm
Trigger
Read Log
Clear Log
OK
3
Move away from
outlet danger of
scalding
