manualshive.com logo in svg

Armstrong AIM ST6700, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
Armstrong AIM ST6700 Скачать руководство пользователя страница 60

North America  •  Latin America  •  India  •  Europe / Middle East / Africa  •  China  •  Pacific Rim

armstrong

international.com

Designs, materials, weights and performance ratings are approximate and subject to change without notice.  Visit 

armstrong

international.com for up-to-date information.

60

8.  Wait until the “Provisioning Network” window is populated.

9.  Under “Provisioning Network” select the device, then in “Target Device Tag” dropdown select the tag being 

provisioned.

10.  Click “Start Provisioning” button to initiate OTA provisioning mechanism. The “Provisioning Status” indication    

 to  monitor will update based on the current stage of the provisioning process (Expected steps: not provision ->    

  waiting-> now provisioning -> provisioned).

Note: The time required for the system 

to detect an OTA provisioning target and 

complete the provisioning process is radio 

environment dependent. A time greater than 

30 minutes for each step (detect/provision) is 

considered a normal behavior.

2.1 OTA Armstrong ST6700 Provisioning and Joining –  

 

 continued

Содержание AIM ST6700





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды