14
INSTALLATION GUIDE continued…
Electrical connection continued…
Sensor taps stickers:
To complete the installation, 2 stickers are
provided which can be stuck onto a wall or panel in close proximity to
this product to advise the end user that this product sensor operated.
6
TAP OPERATION
Sensorflow 21 products use an Infrared Sensor to activate the system.
The sensor is triggered by something reflective (normally hand movement) in the Sens
-
ing Region.
Move hands towards the spout: Water
will flow.
Move hands away from the spout:
Water will continue to flow for a
second or two, and then turn off.
Sensor is factory set to
Proximity Mode
, & is
designed to trigger the water flow
only when a hand (or similar) is in
the Sensing Region –
just in front
of the sensor / outlet.
The sensor is located in the separate sen-
sor housing & is forward facing
Note: 230mm reach spout is
set to 227mm range.
Note: 150mm reach
spout illustrated
Example above of an installation where PSUs are all mains versions.
147
