MAINTENANCE
The ARMEDICA™ Hi-Lo Electric Parallel Bars are equipped with maintenance free electric
motors.
The moving parts of the unit should have a drop of oil placed on them approximately every six
months.
Frequently check to make certain that all hardware (nuts, bolts, etc.) are properly adjusted and
securely fastened.
In the event it becomes necessary to replace the control box or a column on the AM-700 model,
disconnect power prior to removal, and make certain the plugs are completely inserted into the
sockets prior to reconnecting power.
The laminated platform and painted or plated components should be cleaned with mild soap and
water and wiped with a dry cloth to remove dust and dirt when necessary. The Stainless Steel
Rails can be wiped with a commercial brand stainless steel cleaner.
SYMBOLS AND INDICATORS
Attention: Consult accompanying documents.
Type B Equipment: “An adequate degree of protection against electric shock is
provided, particularly regarding leakage currents .
No ground pin is necessary. This unit is double insulated. It is constructed with two
layers of electrical insulation between the user and the electrical system. It can be
plugged into any conventional 120 volt electrical outlet.
TROUBLE SHOOTING
ELECTRIC POWERED COLUMNS DO NOT WORK.
A.
Check to see if the control cables are properly plugged into the control box, and if the
power cord is plugged into the electrical outlet.
B.
Make sure electrical outlet is getting power.
C.
In the event the columns become unsynchronized, contact customer service at Armedica
Mfg. If there is a failure of one or more of the columns, the control box and the columns
must be returned to Armedica Mfg. Corp. Only the manufacturer can service the unit.
POWER AM-700 SPECIFICATIONS
Magnetic Corp., Olney, Illinois 62450
Model LD-014.208.300
Rated Voltage and Frequency 120V 60HZ.
Current 6 Amps.
4 Columns 24 volt DC
LIFTING CAPACITY:
AM-700
400 lbs (181 Kilograms)
4
Содержание AM-700 Series
Страница 10: ...9...
