18
ARMASIGHT by FLIR
COMMAND
U S E R M A N U A L
Use plug A (Figure 3-4) of the video cable to connect an external video recorder/ monitor/ TV to the
Command. Connect plug C of the video cable to the Command connector.
Use plug B of the video cable to connect an external power source (6VDC/ 600mA) to the Command.
Connect plug C of the video cable to the Command connector.
FIGURE 3-4. VIDEO CABLE
A
B
C
NOTE:
The external power supply must have a standard OD double-pole socket with a positive center
contact.
CAUTION:
After removing the cable, replace the protective cap over the connector.
3.1.5 INSTALLING THE COMMAND ON A TRIPOD
To mount the Command to a tripod, screw the tripod into the 1/4’’ threaded socket located on the bottom
of the Command.
CAUTION:
The unit may be badly damaged if the tripod collapses or falls over. Remove the unit from the tripod
if it is not within your reach.
3.2 CONTROLS AND DISPLAY INDICATIONS
3.2.1 CONTROLS
CAUTION:
DO NOT force the equipment controls past their stopping points.
The Command controls are shown in Figures 3-6 and 3-7, and are defined in Tables 3-1 and 3-2. The ITEM
NO. columns indicate the numbers used to identify items in the figures.