PDS-32/42/46/47/52/55
www.
Armagard
.com
Installation Manual Page |
15
Toll Free (US):
1-866-434-0807
Call (UK):
0121-608-7210
Screen Cleaning
– Polycarbonate and Anti-Reflective Polycarbonate
In order to maintain your polycarbonate in a good condition it is recommended that the sheet be
cleaned periodically using suitable household cleaning agents.
The recommended cleaning instructions are as follows:
Use lukewarm water to rinse and soften dirt.
Make up a solution of lukewarm water and ordinary household cleaner or mild soap and use this
to wash the sheet.
A sponge or soft cloth should then be used to gently remove dirt and grime and for large areas a
pressure washer may be used in a suitable outdoor area.
Ethyl alcohol or white kerosene used sparingly can be used to remove paint and other such
substances.
The cleaning process should then be repeated and the sheet rinsed with clean water and dried
with a soft cloth.
Warning -
The following precautions should be observed:
Do not scrub the sheet with brushes or sharp implements.
Do not use squeegees.
Avoid solvents, other than those listed, or any abrasive cleaners.
Avoid cleaners of a highly alkaline composition.
Avoid cleaning in the hot sun or high temperatures.
SCREEN CLEANING
– GLASS DISPLAY
For high toughed glass and anti-reflective glass.
Procedure 1
1. On a mild temperature day, use hot soapy water and wash down the glass to eliminate all traces
of debris and marks.
2. When the window has been washed, rinse it thoroughly and using a clean cloth, dry the screen to
eliminate streaks and blemishes.
3. Alternatively you can use a glass cleaner detergent to get it thoroughly clean.
4. Note: Make sure you work as quickly as possible to avoid streaks appearing during the process.
BEST PRACTICE USE & WARRANTY
1. Mount the enclosure using the recommended brackets to ensure integrity. Do not drill or penetrate
any additional holes into the enclosure for mounting, as breaking the surface will reduce the ingress
rating, and void the warranty agreement.
2. Do not block air vents around the enclosure, obstructions to air circulation will cause overheating and
void the warranty agreement.
3. Do not use enclosures in environments or sheltered areas where the average ambient temperature is
higher than the operating temperature of your display without an air-conditioning module.
MAINTENANCE
