10
SECTION
B
Setting the Daylight Savings Time
This meter has the function of switching from
standard time to daylight saving time (DST).
“ON” (Diagram A) or “OFF” (Diagram B) will blink.
Setting the Time Format
The time can be displayed in either a 12-hour format
(Diagram A) or a 24 hour format (military time) (Diagram B).
Setting the Time
The hour (Diagram 1A) and minute setting
(Diagram 2A) will flash to indicate that it may
be changed.
Setting the Date Format
The date can either be displayed in the month/day format
(m-d) (Diagram A) or the international day/month format
(d-m) (Diagram B).
Setting the Date
Set the month (Diagram A), day (Diagram B)
and year (Diagram C).
Setting the Backlight Setting
To save the battery life, the backlight level is pre-set not to come on.
Select settings of “0,” “5,” “10,” “15,” and “100.”
0 ..................Backlight off.
5, 10, 15 .......Backlight will stay on for 5, 10 or 15 seconds.
100 ..............Backlight will always stay on.
Setting the qcProGuard
®
/ QC Reminder
This can be set to remind someone to perform a control solution test.
When set to “On” (Diagram A), the reminder will prompt you to do a
control solution test every 24 hours. If a control test has not been
performed within 24 hours of the previous test, PCS (Perform Control
Solution test) will flash on the screen along with
am
(Diagram B).
PCS will flash three times and then disappear. The
am
will stay on the
screen and also mark a result in the memory mode.
DST
am
DST
am
A.
B.
A.
B.
am
1A.
2A.
am
d-
m-d
d-
m-d
d-m
-d
d-m
-d
A.
B.
A.
B.
C.
B.
A.
NOTE:
If PCS flashes when inserting strip, then enter control solution mode by pressing
either the Back or Forward button when the apply blood symbol appears on the screen. PCS
will not be on the screen. You will see a control solution bottle at the top right of your
screen.