
10
Water Installation
Correct conditions for installation
1
Connect water hoses to the water inlets for hot and cold
water in the floor.
2
Push the Freedom Bath halfway into the alcove and connect
the other ends of the water hoses to the hot/cold water inlets
on the tub.
Slide - in
3
Lift up the rear part of the tub a bit to get it on the sliding
tracks.
If the tub is in an alcove the side cover will have to be
mounted prior to fully sliding the tub in place.
4
Push the tub until it is in the end position.
5
Mount the cover.
6
Secure the tub with the two locking plates.
The locking plate has to be positioned behind the floor
attachment.