Arjohuntleigh alpha active 4, Инструкция по эксплуатации

Страница: 13 / 32

7
4. Controls, Alarms and Indicators
Controls
On/Off Button
Pressing the
On/Off
button will activate the pump.The
pump will perform a self test during which all LEDs
will illuminate, and audible beeps will sound.
Alarm Mute
During an alarm condition the sound of the alarm can be
muted by pressing this button, and the audible alarm will
be silenced for 15 minutes. The mute state can also be
terminated manually by pressing this button again.
Mode Select
The mode selector allows the mode of operation to be
selected.
Two modes of operation are available, Alternating or
Static (non-alternating). The indicator next to the
respective icon indicates the currently selected mode.
Auto-firm Mode
Selects the
Auto-firm
, non-alternating mode. The orange
indicator will illuminate when the pump is in this mode.
Auto-firm
lasts 30 minutes, after which the pump will
default back to the previous setting.
Patient Weight Selector
Two buttons (+ and -) are used to select the patient
weight. This sets the pressure inside the mattress
replacement and therefore the amount of support the
patient receives. The patient weight setting may be
affected by a power fail event. See Power Fail on
page 8.
The pressure setting is indicated by the green indicator
above the selected setting.
Cycle Time
A single button allows the cycle time to be selected for
patient and/or clinician preference. The cycle time
setting is indicated by the green indicator above the
selected setting.
Kg
Min
Alarms Patient Weight Selector
Cycle Time Alarm Mute Mode Select Auto-firm Mode
Kg
Min