8
Assembly of the RIK Overlay (continued)
5. Zip top cover onto bottom panel ensuring HEAD and FOOT ends are
properly aligned (
Figure 4
). Note the seven magnet flaps must detach from
the wings so that the top cover zips between each flap and wing.
Figure 4
Top Cover
The top cover is made of a nylon fabric with moisture vapor permeable backing
and is designed to fit loosely on the overlay.
Sheet Magnets
Specially designed magnets allow for a flat linen sheet to be placed loosely on
the overlay while still being held securely. Sheets should remain loose to avoid
the increased pressure that occurs with tight fitting sheets. Wrinkles in the sheets
are not of concern, as the fluid design of the overlay helps prevent increased
pressure on the skin at the area of the wrinkle.
Overlay Positioning
The overlay is designed to fit on most standard hospital mattresses.
Patient Ingress and Egress
The RIK Overlay has a firm foam edge of support along each side. It also gives
support during patient ingress and egress.
RIK Overlay Covers
Use only the RIK Overlay covers, as the use of improper covers may adversely
affect the performance of the RIK Overlay. A standard flat sheet, incontinence
pad or turn-and-draw sheet may be used as long as they are kept loose and not
tucked under the overlay edge. Do not use any additional padding on the overlay
surface.
Содержание Rik Overlay
Страница 78: ...78 Denna sida har avsiktligen l mnats tom...