Page | 6
Commercial in confidence. User Manual
POBT-REV4-241019
4. OPERATION
Height Adjustment
(All OBT Variants)
To Lower:
support the top with one hand
and lift the release lever (A) Figure 5.
located at the top of the column.
Push down on the tabletop to the
required height and let go of the lever to
lock in position.
To avoid entrapment, the Overbed
Table is designed to allow it to rise if
pressure is applied from underneath.
To Raise:
lift the top to the required
height. An automatic lock will prevent the
table from descending when you let go.
It is advisable to support the base
with your foot when lifting the top.
Split Top Tilt Adjustment
The tilt angle of the main tabletop (B)
Figure 6. can be adjusted to one of five
different angles.
To Increase the Tilt:
Hold the edge of
the main tabletop (B) Figure 6. and lift
until the ratchet (C) Figure 6. engages at
the required angle.
To Reduce the Tilt:
Hold the main table-
top by edge (B) Figure 6. and raise to
maximum tilt. Once maximum tilt is
reached, it can be lowered down to a flat
position.
WARNING
Take care not to trap hands or fingers between the fixed and moving parts of the table.
Do not place hot drinks on the tilting table section.