Page | 4
Commercial in confidence. User Manual
POBT-REV4-241019
3. ASSEMBLY
The Same Assembly Procedure is Used for all OBT Variants.
Assembly Instructions
Components List:
Tools Required:
•
Base Assembly (Castors Fitted)
•
Spanner 13mm (ring or open)
•
Lift Column Assembly
•
Allen Key 5mm
•
Top Assembly (Either Fixed or Split Top)
•
M8 x 50mm Bolts x 3
•
M8 x 15mm Cap Screws x 4
•
M8 ID Washers x 7
WARNING
The central column is packaged under compression. The column will
expand rapidly when the retaining screw is released if the below process is
not followed correctly. It is important that there is a safe working area for this
operation and that extreme care is taken.
Assembly Procedure:
1. Unpack components from packaging
2. With the base assembly on its side, secure the inner column to the base assembly
using three M8 x 50 hexagon head bolts and M8 ID washers as shown on figure 3.
Inner Column
Base
Figure 3.