22
How to Use the Maxi Sky
600
Ceiling lift
Step 5 - Tilt the frame until connection of the leg
strap clips is possible. The straps must be
brought under the thighs. This may involve
lifting one leg at a time, and may mean
lowering the frame a little more.
When lifting from the bed, some operators
prefer to connect the leg strap clips first. This
in particular applies to patients with large
thighs. To use this method, raise the hip and
knee into maximum flexion, and hook up the
leg strap clips. Tilt the frame towards the
shoulders and then attach the shoulder strap
clips.
Step 6 - Ensure that all four points of the sling are
securely attached to the frame, then lift the
patient using the handset, positioning him/
her comfortably for transfer.
Proceed with the patient transfer to a chair as in
section “To lift from a Chair”, or place the patient
onto a bed, (reversing the above procedure), by
moving and then lowering the patient into the desired
position.
When the patient’s body weight is fully supported,
detach the leg strap clips, then the shoulder
connections.
Move the spreader bar away before removing the
sling from under the patient.
NOTE: For instructions on how to use the
DPS, refer to the “Operating the DPS”
section in this manual.
WARNING: To avoid the patient swinging
excessively during lifting, the lift strap
should be as vertical as possible,
immediately prior to the lift.
Содержание MAXI SKY 600
