Arjo Dual-Loop Attachment Straps, Инструкция по эксплуатации

Страница: 9 / 16

001-05415-EN rev
. 4
Using the DUAL-LOOP ATTACHMENT STRAPS 7
WARNING : Before raising the patient, always
make sure the Ferno Scoop EXL Stretcher is
not caught on any obstructions (i.e. the bed
headboard or footboard). Catching on such an
obstruction could result in the patient falling.
6) Raise the patient sufficiently to clear the bed/
hospital stretcher (See Fig. 6).
Fig. 6
7) Proceed with the transfer.
NOTE: When transferring the patient through a
door, rotate the stretcher frame until the patient’s
head is close to the mast (see Fig. 7). In this
position, the complete unit may be moved through
wide doorways.
Fig. 7
8) Lower the patient down onto the new location.
Fig. 8
9) When the patient’s body weight is fully
unsupported, unhook the straps from the
stretcher frame.
10) Roll the Maxi Move away.
11)
Open the latches and gently slide the two
stretcher sections from underneath the patient.
Reconnect the
Ferno Scoop EXL Stretcher
for
further use.