Service Procedures
MRM Carendo
8
SP 4. Check Mechanical
Attachments
This check is to preserve the safety and
performance of the product.
Check attachment of:
a.
Safety strap knob
b.
Raiser
c.
Tie rods
d.
Care raiser and leg support
e.
Castors: see page “SP 10. Inspect Castors”
on page 14
f.
Bellows, (strap or clamp)
g.
Buttons and handset cable
h.
Locking device
See also “Lubrication, Sealants, Lockings and
Torques” on page 24 and “Tools” on page 30
NOTE
Screws and bolts attached with Loctite should not
be checked by tools but manually to test if the
jointing/component is securely fitted.
If tightening is needed and Loctite is previously
used new Loctite must be applied. Proceed
according to the Loctite manufactures instructions.
f
f
d
a
e
c
f
g
c
b
