1X-E4 Series Operation Manual
1
Introduction
This is the operation manual for 1X-E4 Series conventional fire alarm and
evacuation control panels. Read these instructions and all related documentation
entirely before operating this product.
Product range
The 1X-E4 Series includes the models shown below.
Table 1: 1X-E4 Series models
Model
Description
1X-E4
Four-zone conventional fire alarm and evacuation control panel, supporting four
evacuation areas without alarm counter
1X-E4-NL
Four-zone conventional fire alarm and evacuation control panel, supporting four
evacuation areas with alarm counter
Operating modes
Supported operating modes are shown in the table below. The default operating
mode is NEN 2575 with four evacuation areas.
Table 2: Operating modes
Operating mode
EN 54-13 option
[1]
Region
NEN 2575 4E (default)
Available [2]
European Union
NEN 2575 2E
Available
European Union
NEN 2575 1E
Available
European Union
[1] EN 54-13 supervision requires compatible system wiring and devices and must be enabled
by the installer in the control panel configuration.
[2] Requires a 2010-1-SB expansion board to be installed (not supplied).
As there is no visual indication of the active operating mode, your installation or
maintenance contractor should provide full details of your configuration.
