For ELCB models only
,
refer to fig. 5
To make sure ELCB function work properly, this procedure is recommended
to test at least once a month.
After turn on the electricity and water supply, press the “TEST” button, the red
reset handle will drop out.
Push up the reset handle to resume back the power
supply.
If the reset handle does not drop out after you press the TEST button, switch
off the mains supply and contact your sales agent for repair. NEVER try to
repair the unit by yourself.
Do not use thinne
r
, alcohol, petrol or any other
or
g
anic sol
u
tion to clean the set,
use only a damp cloth with mild detergent.
MAINTENANCE
Test the ELCB
regularly
Cleaning
precaution
9
GB
Clean the filter
There are two filters located at the stop valve, one is mesh filter (installed at
the incoming water supply); the other one
is the
bu
ilt-in
f
ilter as shown in
f
i
g.
5a
.
Clean the two filters regularly to prevent blockage. Remove the built-in filter
by turning it anti clockwise
as shown in fig.6a.
T
ake out the filter and flush it
with water to remove any trapped sediments, as shown in fig.6b.
Note; the specification, actual product‘s cosmetic design and accessories parts
shown are correct at the time of printing and may be subjected to change
without prior notice.
regularly
This inno
v
ati
v
e a
dju
sta
b
le Han
d
shower has
5 different spray actions.
The actions are described as fig.7.
Others
