Ariston GENUS 27 RFFI SYSTEM, Руководство по установке

Страница: 37 / 48

9
B003
TURNING ON THE BOILER
Installation without a room thermostat :
- Turn on the power supply to the boiler by pressing the
On/Off switch “L”; the green L.E.D. “I” will then turn on;
- Turn the “C” selector knob to < >;
- Regulate the temperature of the water in the boiler by
turning the “H” knob. The temperature can vary
between 42°C and about 82°C;
- Check the boiler temperature on the thermometer with
the yellow L.E.D.s “F”. With this type of installation, the
ambient temperature does not influence the operation
of the boiler and
the circulation
pump always re-
mains in
operation.
I
L
C
H
F
Installation with a room thermostat:
- Turn the “C” selector knob to <
>;
- Turn on the power supply to the boiler by pressing the
On/Off switch ”L”; the green L.E.D. will then turn on;
- Turn the thermostat knob “H” to the highest tempera-
ture setting.
- With this type of installation, the boiler is controlled by a room thermostat.
Therefore, it runs until the ambient temperature has reached the tempe-
rature setting on the thermostat. At that point, the main burner will turn off
and the circulation pump will stop.
TURNING OFF THE BOILER
Installation without a room thermostat:
To turn off the heating, turn the “C” selector knob to
<
>. The boiler will still provide hot water for domestic
use.
H
I
L