Ariston Excalibur 100 Скачать руководство пользователя страница 35

Страница: 35 / 44

GENERAL WARNINGS

1. This manual is included in water heater delivery set. It should be kept alongside the appliance even if the

latter is transferred to another user and/or moved to another location.

2. Read this manual carefully. It provides important safety precautions for installation, use and maintenance

of the water heater.

3. The appliance is installed at the expense of the user.

4. The use of the appliance for purposes other than those specified is strictly forbidden. The manufacturer is

not to be held responsible for any damage due to failure to comply with the instructions set in the manual.

5. All installation and maintenance works must be carried out by a qualified technician in conformity with

the current rules and regulations, as well as the directions provided by the manufacturer.

6. Incorrect installation can cause personal injury and property damage. The manufacturer is not to be held

responsible for damage due to incorrect installation.

7. Keep all packing material (clips, plastic bags, polystyrene foam, etc.) out of children's reach. The packing

material is hazardous for health.

8. The appliance is not intended for use by persons (including children) with reduced physical, sensory, or

mental capabilities, or lack of experience and knowledge, unless they have been given supervision or

instruction concerning use of the appliance by a person responsible for their safety.

9. It is strictly forbidden to touch the appliance barefoot or with wet hands and/or feet.

10. Repair works should be carried out by a qualified technician using original spare parts produced by

manufacturer. Failure to comply with this requirement invalidates all warranties on the part of the

manufacturer.

11. The temperature of the hot water is adjusted by a thermostat that acts as a protection against

overheating.

12. Water supply must be done in accordance with paragraph “Hydraulic Connection”.

13. Electric wiring must be done in accordance with paragraph “Electrical Connection”.

14. It is strictly forbidden to modify or replace the safety valve with the other one which does not meet the

current rules and regulations, if it is not included in the delivery set.

15. No inflammable items should be kept near the appliance.

16. The water heater is a technically sophisticated electrical appliance for household purposes.

17. Whenever electrical water heater installation involves re-equipment (rearrangement) of residential and

non-residential premises in residential buildings, installation should be performed only after relevant

permissions have been obtained in a proper manner.

Congratulations on your purchase of an electric water heater manufactured by Ariston Thermo Group. The appliance

is designed in compliance with the European quality standards and conforms to declared technical characteristics. The

water heater is easy to use; it demonstrates great consumer properties and durability in operation. We hope that you will

be satisfied with its work.

Please, read this manual carefully to ensure proper installation and operation of the water heater.

1. GENERAL INFORMATION

1.1. Delivery set and purpose

1.1.1.

Water heater

1.1.2.

Safety valve

1.1.3.

Bracket

1.1.4.

Installation and operation manual

1.1.5.

Warranty certificate

1.1.6.

Original packing

1.1.7.

«T» piece union and drain tap (optional)

The appliance is designed for installation inside the buildings, in the household and utility premises. It is intended for water

heating to a temperature below boiling point, with the option of the hot hot water's supply (not intended for drinking) at

several spots (bathroom, kitchen, and toilet) and further maintenance of the set temperature in the automatic mode.

Water heating time depends on the volume of the water heater and the power of the heating element.

1.2. Main elements

1.2.1. Inner tank

1.2.2. Thermal insulation of polyurethane foam providing minimal heat dispersion

1.2.3. Heating element

1.2.4. Temperature controller which allows you to set the desired temperature of the water heating

1.2.5. Thermostat controlling the temperature of water in the tank

1.2.6. Safety valve which is installed at the inlet of the water heater and serves to prevent the return of water to the water

line and protect the tank from excessive pressure

1.2.7. Magnesium anode rod providing additional protection of the inner tank from corrosion

TECHNICAL CHARACTERISTICS

Product range

30 SLIM 40 SLIM

50 SLIM

65 SLIM

80 SLIM

100

120

150

Weight

(kg)

Enamel

Inox

Installation

Vert.

Horiz. Vert. Horiz.

Vert.

Vert. Horiz. Vert. Horiz. Vert.

Horiz.

Model

Refer to the nameplate

Qelec (kWh)

3,423

7,676

7,655

8,144

7,417 7,430 7,828 7,493 14,637 7,472 13,745 14,960

Load profile

L wa

15 dB

η wh

26,9%

32,2%

32,3%

30,7% 33,1% 33,1% 31,7% 32,9% 33,4% 32,9% 35,1% 32,8%

V40 (I)

130

142

194

This appliance is conforming with the international electrical safety standarts IEC 60335-1 and IEC 60335-2-21. The CE

marking of the appliances attests its conformity to the following EC Directives, of which it satisfies the

essential requisites:

- LVD Low Voltage Directive: EN 60335-1, EN 60335-2-21, EN 60529, EN 62233, EN 50106.

- EMC Electro-Magnetic Compatibility: EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3.

- ErP Energy related Products: EN 50440.

2. INSTALLATION

Attention! The installation and set-up of the water heater must be carried out by a qualified technician in con-

formity with the applicable rules and hygiene and sanitary standards in force and with any provisions set forth

in this manual.

2.1. Hot-water boiler bonding against the wall

2.1.1.

Water heater mounting is made on the main wall using brackets and fastening hooks. Fastening hooks (not included in the

supply) with a diameter of at least 12 mm are recommended. Depending on the model, you will need 2 or 4 of the fastening hooks.

2.1.2.

Prepared fastening must support a weight that is three times higher than the weight of the water heater filled with water.

2.1.3.

The appliance should be installed as close as possible to the point of water intake to limit heat (

in Fig. 1).

2.1.4.

Allow for a clearance of at least 50 cm under the appliance and a clearance of 10 cm from the ceiling for maintenance.

2.1.5.

Fastening of hooks to the wall must prevent inadvertent movement of the bracket of the water heater over them. After

installation, be sure to check security of the fastening.

2.1.6.

To prevent the property of the customer and (or) third party from damage caused by failures of hot water supply system,

it is recommended to mount the water heater in the premises provided with waterproof floor and sewer drain. Never put objects

sensitive to water under the water heater.

2.1.7.

During mounting water heater in the unprotected areas, you must install underneath the protective tray with drainage

into the sewer.

Before cleaning, isolate the appliance from the mains by
unplugging it or turning the switch off

Install the appliance on a solid wall that is not subjected to
any vibrations

Make electrical connections using cables with conductors
of suitable section

Make sure all control and protection functions operate correctly
before start the appliance

Electric shock

Excessive noise

Incorrect conductor section results in cables overheating.
It may cause fire.

Shutdown or damage of the appliance due to out-of-service
or unregulated control system operation

Before water heater handling, drain hot water

Descale the components in accordance with the instructions
provided in the applicable document. Air the room.
Work is performed in protective clothing, avoiding mixing
different products. The water heater and surrounding
objects shall be protected against ingress of cleansers

Do not use any insecticides, solvents or aggressive detergents
to clean the appliance

Burns

Injury due to contact of the skin or eyes with acidic substances,
inhalation or swallowing of harmful chemical agents.

Damage to the appliance or surrounding objects due to corrosion
caused by acidic substances

Damage to the plastic and painted parts

GENERAL SAFETY NORMS

Damage to the appliance or any objects underneath it due to the
object falling off following vibrations

Injury from an object falling off the appliance due to its vibrations

Electric shock in case of cable, plug, or socket damage

Electric shock. Burns due to the contact with overheated
components. Injuries due to the contact with sharp edges or
protrusions

Injury from the falling appliance

Damage to the appliance or any objects underneath it due to the
appliance falling off from its place of installation