4. CAUTIONS
Although your UPS has been designed and manufacturer to assure your personal
safety, improper use can result in electrical shock or fire. To assure safeoperation,
please observe the following rules:
1. Turn off and unplug your UPS before cleaning. Do not use liquid or aerosol
cleaner. A dry cloth is recommended to remove dust from the surface.
2. Do not install or operate your UPS in or near damp conditions.
3. Do not place UPS on an unstable cart, stand or table
4. Do not place UPS in direct sunlight or close to heat sources
5. Do not place UPS power cord in any area where it may be damaged.
6. Do not connect UPS to house hold appliances
e.g. hairdryer, fan heater etc.
7. Do not connect UPS to
Laser printer
8. If you store the UPS or UPS does not operate for a long period, recharge the
battery every month by starting the UPS for 8 hours.
9. The UPS should
be returned to Aristel networks or their agent for battery
replacement (this operation should only be performed by trained specialist staff).
Replacement battery should be the same number and type of battery as
originally supplied.
5.
TROUBLE SHOOTING
Situation Check
items
Solution
UPS power is on but UPS
does not start
The line cord is not
connected or not plugged
in. The wall outlet is faulty.
Connect the line cord to
the UPS and plug the
UPS into a working outlet
Start UPS but Red LED
flashes
Low battery power because
of long term AC power
failure
Connect AC power and
charge battery for 8 hours
UPS does not provide the
expected back-up time
The battery may be low
power because
1. Long-term
storage
2. Overload
3. End of battery life
1. Charge the battery for
8 hours
2. Turn off connected
appliances.
3. Have battery replaced
Red LED illuminates and
continuous beeping alarm
UPS faulty
Disconnect all equipment
and unplug the UPS from
the wall outlet.