2 - 2. OPERATION
2-2-1. Turning the UPS ON
Press the power ON/OFF button on the front panel. After the UPS
green LED is comes on, it conducts a self-test and enters normal
mode.
2-2-2. Starting the UPS on battery
To turn on the UPS without using AC power. Press ON/OFF button
and hold for 6 seconds to conserve battery power (The UPS does not
conduct self-test when UPS start on battery).
2-2-3. Turning The UPS OFF
Press the ON/OFF button for about 6 seconds. The unit will switch to
battery operation momentarily before turning off completely.
3. LED and Alarm Indication:
3 - 1. LED indication
GREEN ORANGE
RED
AC power mode
(UPS ON)
AC input power failure
and switched to
battery mode
UPS overloaded
3-2. Alarm indication
Beep Every 4
seconds
Beep Every 1
Second
Beep
Continuously
Beep Every 0.5
second
UPS in battery
mode. Press
ON/OFF button
for 6 seconds to
stop beep
Low battery
Warning
Battery overload
warning
Battery Low
