8
LINEARIS
4.2
Packaging
ARIS actuators are protected by special cardboard packaging at delivery.
4.3
Safe disposal of packaging
Additionally necessary packaging is made by easily separable packaging materials and can be recycled individually:
•
Wood
•
Cardboard
•
Paper
•
Plastics
4.4
Installation and mounting
•
Inspect the actuator for damages prior to installation;
•
check leak tightness of cable glands and blank plugs prior to initial operation;
•
tighten the cover screws evenly (max. 1.2 Nm);
•
do not operate before limit switches have been adjusted;
•
protect the actuator against climatic infl uences (e.g. by a protective cover);
•
do not expose the actuator to hard shocks (e.g. by dropping);
•
do not attach ropes, hooks or the like to the actuator;
•
permanent overload and blocking leads to actuator damages;
•
spark suppressor capacitor can effect the rotation stability of the actuators and may cause damages;
•
use only ARIS original spare parts.
Consider prior to attachment of couplings:
•
Do not turn the lead screw by force;
•
the connection to an actuator or solid underground is made by pre-assembled mounting brackets.
Driver connection
1. The con rods (A) are connected to the valve by a bolt (B).
2. Lubricate moving parts (OKS 416 or similar).
3. Insert the bolt (B) into the bores of the con rods attach the cotter pin (C).
4. Finally bend the cotter pin ends apart.
Installation position
: The actuators can be installed position independendly.
Protection class IP65 (standard), IP66 (option)
For all actuators observe the following advices:
The initial operation of the actuator is only permitted with orderly closed cover and closed cable entries. Use only cable glands
which are appropriate for the respective protection class.
•
Cable entries
Ensure that all cable entries are closed properly during storage, installation and initial operation.
ADVICE
!
A
B
C
