
GB - 8
CARTON CONTENTS
ASSEMBLY
Handlebars
1. Align handlebar with the outside of the
brace on the unit frame. Make sure the
holes in bar align with holes in bracket
(Figure 6).
2. Put roundhead squareneck bolt through
brace and handlebar.
3. Place pins at end of handlebar into one of
three holes in the brace.
4. Secure handlebar to brace with wing
knobs.
5. Loop recoil starter bracket over the recoil
cord.
6. Put recoil starter bracket in two holes in
handlebar and secure with lock nut.
7. Attach dashboard to the handlebars.
Hook flange on right side of dash around
the handlebar.
Place the dash over the left side
handlebar controls.
NOTE:
Make sure the engine/blade control
cable fits into notch in dashboard.
Align dashboard with holes in handlebar
and secure with long panhead screw on
the left side and the short panhead flange
screw on the right side.
ASSEMBLY
CAUTION:
AVOID INJURY. Read
and understand entire
Safety
section
before proceeding.
Figure 5
1. Mower Unit
2. Plastic Frame
3. Hardware Pack
4. Metal Frame
5. Cloth Bag
6. Rear Discharge Deflector
1
2
3
4
5
6
OM1580
Figure 6
1. Roundhead
Squareneck Bolt
2. Adjustment Holes
3. Pin
4. Washer
5. Wing Knob with
Nut
5
4
1
2
3
OM1510