Ariens 911088 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 22

Ariens 911088 Скачать руководство пользователя страница 18

GB - 18

To adjust:

1. If the measurement is more than 2-1/8"

(52 mm), loosen the lower cable nut and
then tighten the upper cable nut against
the adjuster bracket.

2. If the measurement is less than 2"

(51 mm), loosen the upper cable nut and
then tighten the lower cable nut against
the adjuster bracket.

3. Recheck measurement.
4. Repeat adjustment until wheel drive

control is properly adjusted.

IMPORTANT:

If there is not enough thread

length for proper adjustment, contact your
Dealer for repairs before operating unit.

IMPORTANT:

NEVER spray unit with high-

pressure water or store unit outdoors. Store
mower in a cool, dry, protected location.

Cleaning

Clean unit thoroughly with mild soap and low
pressure water. Brush off dirt and debris from
all surfaces. Touch-up all scratched surfaces
to prevent rust.

Inspection

Inspect mower and repair or replace worn or
damaged parts to avoid delays when
beginning use again.
Regularly check all hardware and keep
fasteners tight. Know unit is in safe working
condition.

Grass Collector

Wash out grass collector and allow to dry
before storage. Grass collector may be stored
in position on mower.

Engine

When storing unit for extended periods of
time, remove all fuel from tank and carburetor
(run dry). Refer to engine manual.

OM1370

Figure 16

2 - 2-1/8"
(51-52 mm)

Tension Spring

STORAGE

CAUTION:

AVOID INJURY. Read

and understand entire

Safety

section

before proceeding.

«
...
16
17
18
19
20
...
»

Содержание 911088























Отзывы:

Нет отзывов