EN - 18
2. Install blower belt cover (item 23) to
blower assembly using one 1 1/2" washer
(item 25) and one clamping knob (item
24). See Figure 31.
INSTALL HOSE
See Figure 32.
1. Place mower deck in lowest position.
2. Install one end of hose (Item 5) onto hose
adapter.
3. Install opposite end of hose onto bagger
assembly (Item 1).
NOTICE:
Hose must remain secured at all
mower deck heights. Refer to bagger kit
Instruction Sheet for hose clamp installation
instructions.
INSTALL BAGS
1. Release bagger cover latch straps.
2. Lift bagger cover up to access bagger
frame.
3. Install grass bags. The smooth heat-
resistance surfaces of the mesh bags
must face the engine. See Figure 33.
4. Close cover and connect rubber straps.
Figure 31
23
24
25
Figure 32
Hose
Adapter
5
1
Figure 33
Smooth heat-resistant
side must face engine
