background image

EN - 8

Batteries

Avoid electric shock. Objects contacting 
both battery terminals at the same time may 
result in injury and unit damage. DO NOT 
reverse battery connections.

Reverse connections may result in sparks 
which can cause serious injury. ALWAYS 
connect positive (+) lead of charger to 
positive (+) terminal, and negative (-) lead to 
negative (-) terminal.

ALWAYS disconnect negative (-) cable 
FIRST and positive (+) cable SECOND. 
ALWAYS connect positive (+) cable FIRST, 
and negative (-) cable SECOND.

Explosive gases from battery can cause 
death or serious injury. Poisonous battery 
fluid contains sulfuric acid and its contact 
with skin, eyes or clothing can cause severe 
chemical burns.

No flames, No sparks, No smoking near 
battery.

ALWAYS wear safety glasses and protective 
gear near battery. Use insulated tools.

ALWAYS keep batteries out of reach of 
children.

Battery posts, terminals and related 
accessories contain lead and lead 
compounds, chemicals known to the state of 
California to cause cancer and reproductive 
harm. Wash hands after handling.

Service

The use of non-genuine replacement parts 
or accessories could adversely affect 
machine operation and safety.

Do not change engine governor setting or 
overspeed the engine.

Maintain or replace safety and instruction 
labels as necessary.

Keep unit free of debris. Clean up oil or fuel 
spills.

ALWAYS block wheels and know all jack 
stands are strong and secure and will hold 
weight of unit during maintenance.

Release any pneumatic or hydraulic 
pressure from components slowly.

NEVER attempt to make any adjustments to 
unit while engine is running (except where 
specifically recommended). Stop engine, 
remove key and spark plug wire and wait for 
all moving parts to stop before servicing or 
cleaning.

Lower cutting deck unless a positive 
mechanical lock is used.

Allow engine to cool before servicing.

Moving parts can cut or amputate fingers or 
a hand. On multiblade mowers, rotation of 
one blade will cause all blades to rotate.

NEVER weld or straighten mower blades.

NEVER make adjustments or repairs with 
the engine running.

Mower blades are sharp. Wrap the blade or 
wear gloves, and use extra caution when 
servicing them.

ALWAYS keep body and hands away from 
pin holes or nozzles which eject hydraulic 
fluid under pressure.

Transporting Unit

Use extra care when loading or unloading 
the machine into a trailer or truck.

Secure unit chassis to transport vehicle. 
NEVER secure from rods or linkages that 
could be damaged.

DO NOT transport machine while engine is 
running.

ALWAYS turn off power to attachment and 
shut off fuel when transporting unit.

Storage

NEVER store unit with fuel in fuel tank inside 
a building where any ignition sources are 
present.

Keep machine free of grass, leaves or other 
debris build-up. Clean up oil or fuel spillage 
and remove any fuel-soaked debris. Allow 
machine to cool before storing.

For extended storage, close fuel shut off 
valve and clean unit thoroughly. See engine 
manual for proper storage.

Содержание 891008





























Отзывы: