EN - 10
IMPORTANT :
Bagger requires a separate
installation kit based on the deck size. See
Installation Kits
on page 23.
REMOVAL
1. Stop engine, remove key, wait for all
moving parts to stop and for hot parts to
cool.
2. Disconnect spark plug wires.
3. Remove four screws retaining pocket
covers and remove covers. Discard
covers; reinstall screws for better
appearance. See Figure 4.
INSTALL BAGGER
IMPORTANT:
Install bagger support brackets
if unit does not have a ROPS. Skip to
(ROPS
Units Only)
on page 14.
Install Left Bagger Support
See Figure 5.
1. Remove fuel cap.
2.
Apex Models:
Remove three plastic hex
screws retaining left fender and remove
fender.
3.
HD Models:
Remove four plastic hex
screws retaining left fender and remove
fender.
Figure 3
1
5
13
10
14
12
6
3
4
2
11
9
15
16
17
18
8
7
19
20
22
21
35
23
25
24
30
26
27
28
29
31
32
33
34
Figure 4
Discard two covers.
