Argus ALPHA OUTBACK ENERGY Cordex 48-1kW, Инструкция по эксплуатации

Страница: 37 / 46

030-713-C0 Rev A WC
Page 23 of 23
10 Argus Conventions
10.1 Numbering System
Argus Technologies uses an eight-digit drawing number system, which is broken into three blocks. The first three
digits describe the category of the product; e.g., rectifier or fuse panel. The next three digits indicate the sequence
in which the product number was allocated in a particular category. The last two digits indicate the type of
drawing, for example:
“-05” Schematic
“-06” Outline Drawing
“-20” Main Assembly
Argus uses an eight-digit part numbering system for all components and sub assemblies. Each part is covered by
its own unique number. Due to the quantity, categories will not be listed within this manual.
10.2 Acronyms and Definitions
AC Alternating current
AWG American wire gauge
CAN Controller Area Network
CEC Canadian Electrical Code
CSA Canadian Standards Association
CX Cordex series; e.g., CXC for Cordex™ System Controller
DC Direct current
EIA Electronic Industries Alliance
HVSD High voltage shutdown
LED Light emitting diode
LVD Low voltage disconnect
NC Normally closed
NEC National Electrical Code (for the USA)
NO Normally open
OSHA Occupational Safety & Health Administration
OVP Over voltage protection
RAM Random access memory
UL Underwriters Laboratories