![background image](http://html.mh-extra.com/html/argos/608-0842/608-0842_assembly-instructions-manual_2968701010.webp)
F
964mm
F
Assembly Instructions
Use 2nd hole in from front of
Runner F1004 to fit 1st F73 then
fit other F73 to match other hole.
Rebated Edge
F73
COVERED EDGE
Use 2nd hole in from front of
Runner F1004 to fit 1st F73 then
fit other F73 to match other hole.
F1004
When you insert F900,
make sure the arrow is
pointing towards the hole
in the edge of the panel.
F900
F73
F1004
COVERED EDGE
9
1
E
A
Step
9
D
Fit the unit to the wall
To fix the unit to the wall,
place the unit in the
required position and
lightly mark the outline of
the top corners of the
unit with a pencil.
Fit the 2 wall brackets
to the dimensions shown
in the top diagram.
The screws and plugs
are not supplied as they
need to be the correct
type to suit your wall.
Place your unit onto the
wall brackets , via the
hanging brackets
which you have fitted to
the sides of the unit.
Use the screw in the
bottom of the wall
brackets to adjust the
height of the unit.
Finally, pull the unit up
against the wall by
tightening up the top
screw in the hanging
brackets .
18mm
37mm
964mm
18mm
To adjust the height of
the unit on the wall,
turn the bottom screw
Pull the unit up
against the wall
by tightening
the top screw
Warning:
Take
care when
drilling the wall
that you do not drill into
any pipes, wires etc. If in
doubt, consult an expert.
F
F
K
1
K
F
F
Outline of
the unit
K
F
K
1
Warning:
The
unit is heavy.
Lift with care.
1
Note:
The diagrams show the wall brackets with 3 holes.
They can also be supplied with just 2 holes.
Содержание 608/0842
Страница 16: ...ALR2461 ...