Argos 608/0842, Руководство по сборке

Страница: 12 / 16

Assembly Instructions
Use 2nd hole in from front of
Runner F1004 to fit 1st F73 then
fit other F73 to match other hole.
Rebated Edge
F73
COVERED EDGE
Use 2nd hole in from front of
Runner F1004 to fit 1st F73 then
fit other F73 to match other hole.
F1004
When you insert F900,
make sure the arrow is
pointing towards the hole
in the edge of the panel.
F900
F73
F1004
COVERED EDGE
11
1
E
A
Step 13
Small piece of
waste wood
Drill the handle holes
in the door
Important:
Please follow
these instructions
carefully.
Lay the doors down
onto a smooth surface.
Important: Check that
the holes and hinges are
in the same place as the
diagrams.
Note: We recommend
the use of a small piece
of waste wood, placed
behind the hole while
drilling, to reduce the
possibility of any
breakout.
Using the pilot hole in
the rear face of the
door , drill through the
holes indicated opposite,
using a 2.5mm diameter
drill.
Turn the door over
and open out the 2.5mm
holes that you have just
drilled by drilling back
through them with a
5mm drill.
ONLY drill
these 2 holes
DO NOT drill
these holes
This will be
the left door
This will be
the right door
4
4
4
4
4
Small piece of
waste wood
ONLY drill
these 2 holes
DO NOT drill
these holes
4