Argos 608/0842 Скачать руководство пользователя страница 2

Страница: 2 / 16

Safety and Care Advice

Important -

Please read these instructions fully before starting assembly

•

Warning:

This unit weighs

approximately 23kgs.

Please lift with care.

• Check you have all the

components and tools listed on

pages 2 and 3.

• Remove all fittings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

• Parts of the assembly will be

easier with 2 people.

Glue Safety -

Take care when using glue, please follow the advice below

Skin contact:

Remove contami-

nation by washing with soap and

water. This procedure should be

followed prior to aeting and

drinking.

Eye contact:

Rinse immediately

with clean water for 15 minutes

and seek medical advice.

If swallowed:

Seek medical

advice immediately.

Care and maintenance

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

Note:

If required the next page

can be cut out and used as

reference throughout the

assembly. Keep this page with

these instructions for future

reference.

• We do not

recommend the

use of power

drill/drivers

for

inserting screws

as this could damage the unit.

Only use hand screwdrivers.

•

Safety note:

It is

recommended that this unit is

secured to a wall using the

bracket supplied.

• Dispose of all packaging

carefully and responsibly.

bracket supplied

Содержание 608/0842

















Результаты поиска

Содержание 608/0842

Отзывы:

Похожие инструкции для 608/0842

Бренды по названию

Популярные бренды

Argos 608/0842, Руководство по сборке

Результаты поиска

Содержание 608/0842

Отзывы:

Похожие инструкции для 608/0842

Бренды по названию

Популярные бренды