Argo-Hytos TSE3-D, Руководство по эксплуатации

Страница: 10 / 12

Subject to change · TSE3-D_9193_1en_09/2019
More information at www.argo-hytos.com
Strana 10
9.4.9 Graphical depiction of the colour change of the display
Display colour change for the parameters
[r1ou] / [r2ou], mode hysteresis function
Display colour change for the parameters
[G1ou] / [G2ou] , mode hysteresis function
Measured value > switch point OUT1/OUT2;
Display = red Measured value > switch point OUT1/OUT2;
Display = green
Display colour change for the parameters
[r1ou] / [r2ou], mode window function
Display colour change for the parameters
[G1ou] / [G2ou], mode window function
Measured value between FL1/FL2 and FH1/FH2;
Display = red Measured value between FL1/FL2 and FH1/FH2;
Display = green
Colour change display green
Colour change display red
1 Initial value of the measuring range
2 Final value of the measuring range
Representation [r-12] / [G-12] only
possible when [ou2] = switching
output.
Display colour change for the parameters
[r12],
mode
hysteresis function
Display colour change for the parameters
[G12],
mode
hysteresis function
Measured value between OUT1 and OUT2;
Display = red Measured value between OUT1 and OUT2;
Display = green
Display colour change for the parameters
[r12], mode window function
Display colour change for the parameters
[G12], mode window function
Measured value outside FL1 ... FH1
and FL2 ... FH2;
Display = red Measured value outside FL1 ... FH1
and FL2 ... FH2;
Display = green
Colour change display green
Colour change display red
1 Initial value of the measuring range
2 Final value of the measuring range
FL1 / FL2 Lower limit value window function
outputs OUT1 / OUT2
FH1 / FH2 Upper limit value window function
outputs OUT1 / OUT2