23
5. Transmission losses
Sometimes transmission losses may arise, indicated by missing
temperature data in the sensor’s curve display.
Data losses may be caused by:
1.
Problems with the TL-ALU9 alarm receiver
2.
Problems in the temperature sensor module
3.
Problems in the signal transfer between temperature sensor
module and Alarm receiver
5.1. Problems inside the TL-ALU9 receiver
The receiver does not registrate a single data signal, even if the sensor is
located at a minimum distance to the receiver.
Potential problems:
-
Receiver is not in the range of the sensors
-
The TL-ALU9 receiver has no power
-
Unknown TL-ALU9 problem.
Suggested solutions:
-
Check the Power
-
Remove the Power adapter connector, wait about ten seconds
and reconnect the cable again.
-
Install the latest TL-ALU9 firmware.
E
N
G
L
I
S
H
Please check the internal TL9-ALU clock battery (Type CR2032)
The lifetime of the TL9-ALU battery is about 5 years!
E
N
G
L
I
S
H
