22
Screen2: TL ALU9 General configuration
The general settings of the unit can be inspected and changed by this screen.
With the ‘read’ button the current settings are read, and with the ‘write’
button the given parameters are stored in the unit.
The following parameters can be set:
Clock offset:
The internal clock is set by the pc to UTC
1
time. To convert the
displayed time to local time this offset is used.
Alarm repeat time („rpt“):
repeat alarm time. The alarm is repeated after
this period of time when the alarm was left unconfirmed.
Duration of alarm signal („beep“):
duration of the buzzer. The buzzer will
turn on when an alarm is set, and turn off when the user presses button (1)
or (2), or when the buzzer is active for more than this duration.
Screensaver time (scrn):
display time-out. When no button is pressed, the
display will turn off after this period of time. By pressing a button the
TL-ALU9, the screen will turn on again.
Graph step time („graph“):
the time between 2 data points in seconds. There are 24
data points shown per graph. This value defines the total time-span of the graph.
(1) Coordinated worldtime, also UTC (Universal Time Coordinated), this is the official standard worldtime.
E
N
G
L
I
S
H