20
Mode D shows the model and firmware version, the actual date and
time, and the actual general setting-values.
The setting-values can be
changed by the TL-ALU9 configuration tool.
general setting-values:
graph:
the time between 2 data points in seconds. There are 24 data points
shown per graph. This value defines the total time-span of the graph.
beep:
duration of the buzzer in seconds. The buzzer will turn on when an
alarm is set, and turn off when the user presses button (1) or (2), or when
the buzzer is active for more than this duration.
scrn:
display time-out in seconds. When no button Is pressed, the display
will turn off after this period of time. By pressing a button, the screen will
turn on again.
rpt:
repeat alarm time in seconds. The alarm is repeated after this period of
time when the alarm was left unconfirmed.
E
N
G
L
I
S
H
