IMPORTANT SAFEGUARDS
TECHNICAL SPECIFICATIONS
Please read this instruction manual carefully before using the appliance.
Save the instruction manual as you may require it in future.
This device is designed for modeling and styling hair . For household use, not suitable for industrial use.
The device is intended for use only for domestic purposes in accordance with this Instruction Manual.
After unit transportation or storage at low temperature it is necessary to keep it for at least 4 hours at room temperature
before switching on.
• Read this manual carefully before operating the unit to avoid damage during use. Incorrect handling can lead to damage to the product, cause
material damage or cause damage to the health of the user.
• Before initial start-up, check that the product specifications match the mains supply.
• The device is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience or
knowledge, unless they are under the control or instructed about the use of the device by the person responsible for their safety.
• Use only for domestic purposes.
• Do not spray hair styling products while the appliance is running.
• Do not use forceps in bathrooms or near other sources of water.
• To reduce the risk of electric shock, do not immerse the appliance in water or other liquids.
• When disconnecting the appliance from the mains, hold the plug by hand, do not pull on the power cord.
• Always unplug the appliance if it is not in use.
• Do not leave the appliance switched on unattended.
• Do not use attachments not supplied with this unit.
• Do not carry the appliance by the cord.
• Do not use the appliance with a damaged power cord or plug, or if it has been exposed to liquids, dropped or damaged in any other way. Do not
attempt to disassemble and repair the device yourself, contact the service center.
• If the power cord is damaged, it must be replaced by the manufacturer, the customer service or similar qualified personnel to avoid danger.
Be careful during operation, do not allow the heating element of the forceps to come into contact with unprotected skin. The working area is
heated to 200 ° C.
Avoid touching heated surfaces with a power cord.
Your new tongs are provided with a protective coating of the heating element. At the first start-up and heating, a short, brief smoke and odor may
appear. It is safe to use and does not mean a defect of the forceps. When using for the first time, wait until smoke and odor cease. This can last
no more than 30 seconds.
Operation mode of the hair straightener: after 30 minutes of operation, break for at least 15 minutes.
Service lifetime - 3 years
Warranty period - 12 months
ENGLISH
OPERATION
TRANSPORTATION. Transportation of the device is necessary by any kind of covered transport with the application of cargo securing rules
ensuring preservation of the presentation of the product and / or packaging and its further safe operation. DO NOT expose the device to shock
loads during handling operations.
CLEANING. Before carrying out maintenance or cleaning operations, remove the plug from the power outlet and wait for the appliance to cool.
Do not use abrasives or solvents for cleaning.
Do not allow water to enter the handle.
STORAGE. The device must be stored indoors, in conditions that presume the preservation of the presentation of the product and its further safe
operation. Make sure that the appliance and all its accessories are completely dried, before storing it. To avoid damaging the cord, do not wind
it on the case, or hang the power tongs by the power cord.
Supply voltage: 220-240 V ~ 50 Hz
Power consumption: 50 W
• To model hair, the hair must be clean, dry and free of varnish, gel, and other hair styling products. Your hair-straightener can always be used to
quickly fix a hairstyle.
• Place the desired plate on the hair-straightener by pressing it in until it clicks in the correct position. To remove the plate, press the plate release
button, then pull upward to remove it from the mount.
• Unwind the power cord completely. Place the hair-straightener on a smooth, flat surface, plug them into the net, press the On / Off button, and
allow the device to warm up (approximately 2 minutes).
• Divide the hair into strands, hold the strand between the plates to lock in this position for 1-2 minutes.
• The set includes:
- Replaceable plate - straightener: allows straightening curly hair
- Plates of maxi and miniwaves: to make straight hair wavy.
Do not brush your hair immediately after styling. Do not touch the plates immediately after use, because they are still hot.
• When finished, press the On / Off button and disconnect the mains plug from the mains. Make sure that the indicator light goes out - that is, the
appliance is disconnected from the power supply.
The product is accepted for warranty service in its pure form.
The warranty covers all manufacturing and construction defects (except those
listed in the "Warranty does not apply" section), identified during the warranty period. During this period defective parts, except consumables,
are subject to free replacement in the warranty service center.
When purchasing the product, ask for it to be checked in your presence.
Without the having a warranty card or when it is not properly filled in,
the quality claims are not accepted, and no warranty repair is performed.
The warranty card should be presented at any address to the service
center during the whole warranty period. The product is accepted for service in a complete set only. The warranty period is calculated from the
moment of sale to the buyer. Keep the documents confirming the date of purchase of the product (cash receipt).
The condition of free warranty service of your product is its correct operation, which does not go beyond personal domestic needs, in accordance
with the requirements of the operating instructions for the product, the absence of mechanical damages and the consequences of careless
handling of the product.
