Ares ETHOS QX 130, Инструкция по эксплуатации

Страница: 14 / 40

14
Dual Rate Output/Value
This indicator, which shows in place of the throttle/rudder/elevator/aileron channel
output/stick position value when the Dual Rate button is toggled, shows the control rate mode
currently selected; ‘100%’ for high rate and ‘60%’ for low rate (please see the ‘Transmitter Dual
Rates’ section of this manual for more information).
Throttle Channel Trim Position Indicator
This indicator shows the approximate throttle channel trim position. The trim should be set to
the middle position for all flights.
Rudder Channel Trim Position Indicator
This indicator shows the approximate rudder channel trim position. The trim position should be
adjusted as needed during flight to ensure the nose of the quadcopter does not constantly turn
(yaw) left or right when ‘hovering’ and without any rudder channel/control input.
Elevator and Aileron Channel Trim Position Indicators
These indicators show the approximate elevator and aileron channel trim positions. The trim
positions should be adjusted as needed during flight to ensure the quadcopter does not
constantly ‘drift’ forward/backward (elevator) or left/right (aileron) when hovering and without
any corresponding channel/control input. These trim positions will not often change after
they’ve been set correctly.
The ‘DUAL RATE’ button (located near the top right ‐ hand corner of the transmitter) is used to the
toggle between the ‘High’ (100%) and ‘Low’ (60%) control rates, also known as ‘Dual Rates’, available
for the aileron and elevator controls/channels. You can toggle between the high and low rates by
pressing the button, after which you should feel a ‘click’ and also hear an audible beep/tone. The
selected control rate will be displayed as ‘100%’ for high rate and ‘60%’ for low rate on the LCD
screen.
IMPORTANT NOTE: The transmitter will automatically default to the ‘Low’ (60%) rate mode
each time the transmitter is powered on.
Transmitter Dual Rates