AREMDE NEXUS Скачать руководство пользователя страница 46

Страница: 46 / 80

- Use

keys to select ACTIVE/ NON ACTIVE for each group.

- Using

to select NON ACTIVE will return to the main menu.

- Using

to select ACTIVE then

keys to set hour and minutes after which the alarm will be

displayed.
- Press

to confirm hour and minutes, then

to confirm and return to main menu.

- Press

key to return to the previous menu without confirming.

16. Language

- Press

to activate menu, set language will be displayed on screen.

- Use

keys to select desired language.

- Press

key to confirm and pass to the next step.

- Press

key to return to the previous menu without confirming.

17. Temperature

- Press

to activate menu, set temperature will be displayed as CELSIUS or FAHRENHEIT.

- Use

keys to change unit measure displayed.

- Press

key to confirm and pass to the next step.

- Press

key to return to the previous menu without confirming.

18. Light Adjustment (menu is open but not activated in Nexus/Stylus One)

6.0 PROGRAMMING AND SET UP

Содержание NEXUS

















































































Результаты поиска

Содержание NEXUS

Отзывы:

Похожие инструкции для NEXUS

Бренды по названию

Популярные бренды

AREMDE NEXUS, Руководство пользователя

Результаты поиска

Содержание NEXUS

Отзывы:

Похожие инструкции для NEXUS

Бренды по названию

Популярные бренды