AREMDE NEXUS Скачать руководство пользователя

Страница: 42 / 80

Do not exceed set point temperature beyond 105°Celsius.

- Press the

key to confirm adjustment and pass to the next value.

- Once the last unit has been confirmed the function will return to the main menu.
- Pressing the

key moves to the next value. Any changes made will not be saved.

8. Cup-Warmer Programming (not activated in Nexus/Stylus One)

9. Date/Hour

- Press

to access date/time settings.

- The time settings will flash on and off, these can be adjusted by using the

keys.

- Press the

key to confirm adjustment and pass to the next value.

- Press the

key to return to the previous menu without confirming.

10. Display Settings

On the display screen it is possible to show the temperature and delivery display of each group.

- Press

to activate TEMP. DISPLAY menu.

- Use the

keys to select ACTIVE or NOT ACTIVE.

6.0 PROGRAMMING AND SET UP

Содержание NEXUS

















































































Результаты поиска

Содержание NEXUS

Отзывы:

Похожие инструкции для NEXUS

Бренды по названию

Популярные бренды

AREMDE NEXUS, Руководство пользователя

Результаты поиска

Содержание NEXUS

Отзывы:

Похожие инструкции для NEXUS

Бренды по названию

Популярные бренды