57
58
MS-650 User Manual
7.4.1 Basic settings
1. Insert logo: select location of picture file from dropdown menu, press to select desired logo file to insert.
2. Add head / tail to video: insert short video at the beginning and ending of your recording, press to select
desired video file to insert.
3. Audio delay: Delay of sound after video transmission. Image of user or video sync with audio output. Video and
audio paired without inconsistence.
4. Line out loop through: You may set audio loop output on or off. You may close audio loop output to eliminate
amplification feedback. The latter is a string of sharp swish of high frequency output from a speaker which, in turn,
is collected by a speaker from the same speaker and then amplified and sent to it for the second time.
5. Remove section of video: Adjust recording interval. If you set this to 1 second, then the recording pauses for one
second intermittently.
6. Key Note: Add knowledge point manually, at regular period, or when changing slides in PPT file.
7. Presentation software: Check to enable PPT indexing software.
* See 6.2.11 for information on PPT indexing software.
8. Countdown seconds: Number of seconds to countdown before recording, available options are 10, 5, and 3
seconds of Disable.
9. Video display mode: Available options are NTSC and PAL with the latter the default value.
* Please press Apply after settings are changed successfully. New settings effect starting from next recording.
