Original User Manual
–
A
REBO
S Ice Maker
9
L5
“ADD
WAT
ER”
LED
Refill water indicator: shows too little water, water must be refilled. The
device switches off automatically.
1. Open the lid and remove the ice cube tray.
2. Pour drinking water into the water tank up to the MAX-marking.
3. put the ice cube tray back and close the lid. Press POWER key (1) to re-
start making ice.
6.
Cleaning and storage
6.1 Cleaning
•
Please always disconnect the device from the power supply before carrying out cleaning
work.
•
Do not immerse the device in water.
•
Note:
For hygiene reasons, you should change the water in the container after 24 hours.
To avoid fungus and bacteria, please leave the lid open after use.
6.1.1 Ice cube container
•
Remove the ice cube container and clean it with a mild detergent under running warm water.
6.1.2 Casing and Interior
•
Clean casing and interior with a damp cloth.
•
Use a diluted solution of vinegar and water.
6.1.3 Drain Residual water
•
Drain the residual water if the appliance is not in use for a longer period of time.
•
Rest the appliance on a table edge. Hold a bowl under residual water drain valve.
•
Turn the residual water drain valve anti-clockwise to drain off the rest of water.
•
Close the residual water drain valve after the residual water has been drained.
6.2 Storage
•
Please keep the appliance in the original packing if you do not intend using it for long periods.
•
Always keep the appliance out of the reach of children in a dry, well-ventilated place.
