Original User Manual
–
A
REBO
S Electric Blanket
10
4
Using the blanket
•
Please set at “H” preheating 30
-60 minutes before using. When using it, select the appropriate
tap position according to human body’s
feeling. If you will go to sleep or use it for a long time,
please set at “L” tap position or “1” tap position.
4.1 Application method
•
The starting up state is the standby state. The digital display of temperature is 0 and the timing
display is 0.
o
Press TEMP and display temperature at 7 tap position and the timing state is 9 hours.
o
Press TEMP and display the tap position circulates among L1.2.3.4.5.6.7.
o
Press TIME and the timing state circulates from 1-9 hours
o
Press High key and the temperature tap position are preheating which is displayed as
H. This tap position will automatically change to L tap position 1 hour later.
4.2 Fault introductions
•
If the temperature is displayed as P, please check whether the coupler of the electric blanket
has been connected firmly or not and restart it. If the fault cannot be removed, it means the
internal connection of the electric blanket has problems and it needs to ask help from after-
sales service.
•
If the temperature is displayed as E, it means the electric blanket has internal short circuit and
has been broken.
•
If the temperature on the controller displays as C which means the controller has been
overheated, please disconnect the appliance from the mains, and wait till the controller cools
down then it is safe to use.
To remove the controller, lift the locking tab up with your finger and pull the plug directly out. Do not
pull the controller cable and Do Not try and pull the controller plug out without lifting the locking tab
as you will damage the socket.
4.3 After use
When the blanket is not in use, please switch the controller to the off position; remove the plug from
the power socket. If the blanket is not to be used for a long period of time, store the blanket in a cool
and dry place.
