background image

ARDISAM

2

WARRANTY AND REGISTRATION

Thank You . . .

for purchasing an Ardisam, Inc. GARDEN STAR rototiller. We guarantee that this rototiller conforms to

applicable North American safety standards, and have worked to ensure that it will meet your exacting

standards for usability and durability. With proper care, your rototiller will provide many years of service.

Please take time to read this manual carefully to learn how to operate and service your rototiller correctly.

Failure to do so could result in personal injury or equipment damage. This manual should be considered a

permanent part of your rototiller. Congratulations on your investment in quality.

TWO YEAR

LIMITED WARRANTY

The Ardisam, Inc., Manufacturing Company warrants this
GARDEN STAR rototiller to be free from defects in material
or workmanship. Conditions of this warranty include:

What is covered under warranty:

For the first year from the date of purchase, Ardisam  will
furnish 100% parts and labor to correct any defect caused
by faulty material or workmanship. During the second year
of ownership, Ardisam will furnish 100% of the parts to
correct any defect caused by faulty material or workmanship.
All repairs made under warranty must have prior approval
from Ardisam, Inc. Belts, batteries, tines, shear bolts and
tires, due to the nature of their function, are subject to normal
wear and tear and are covered only during the first year of
the warranty period. Any unit used in a commercial
application is covered for a period of 90 days after purchase.
The engine is covered under a separate warranty issued
by the engine manufacturer as stated in the engine manual.

What is not covered under warranty:

This warranty applies only to products which have not been
repaired or altered outside our factory. It covers only defects
resulting from normal use, and does not cover defects
arising from misuse, alteration, negligence, or accident. This
warranty applies only to the original purchaser, and is not
transferrable.

This warranty supersedes all other warranties either

expressed or implied and all other obligations or liabilities
on our part. Ardisam, Inc., does not assume, and does
not authorize any other person to assume for us, any
liability in connection with the sale of our products. This
guarantee is void unless the warranty card is properly
filled out and returned to Ardisam, Inc., Cumberland,
Wisconsin, within two weeks of the purchase date.

ARDISAM

ARDISAM, INC.

M

OWERS

 

 

P

OWER

 A

UGERS

 

 

R

OTOTILLERS

 

 

1360 1

st

 Avenue; P.O. Box 666

Cumberland, Wisconsin 54829

(715) 822-2415      Fax (715) 822-4180

1-800-3456-007

You must read, understand and comply with all safety
and operating instructions in this manual before
attempting to setup and operate this equipment.

Failure to comply with all safety and operating
instructions can result in loss of machine control, serious
personal injury to you and/or bystanders, and risk of
equipment and property damage. The triangle in the
text signifies important cautions or warnings which must
be followed.

CALIFORNIA PROPOSITION 65 WARNING

Engine exhaust from this product contains chemicals
known, in certain quantities, to cause cancer, birth
defects, or other reproductive harm.

CAUTION

CAUTION

For easy reference, please record the

information on the chart below.

The Rototiller Reference Data can be found on an
identification tag located on the engine mount. 

(Refer to

the engine manual for location of engine information and
serial number.)

ROTOTILLER REFERENCE DATA

Model Description/Number

M/N (Manufacturer's Number)

S/N (Serial Number)

Dealer Name

Date Purchased

ENGINE REFERENCE DATA

Engine Make/Model

Engine ID/Serial Number

Содержание GARDEN STAR 5020D









































Отзывы: